Robe LiteWare HO2, Руководство пользователя

Страница: 14 / 25

LiteWare HO2
14
Total - the function shows the total number of the operation hours since the LiteWare HO2 has
been fabricated.
Reset - the function shows the number of the operation hours that the LiteWare HO2 has been
powered on since the counter was last reset.
In order to reset this counter to 0 you have to press the ENTER button, then by means of the PREV
and NEXT buttons select “Yes”and press the ENTER button again.
DM In --- DMX values . Select this function to read DMX values of each channel received by the fixture.
Temp --- Fixture Temperatures. Select this menu to read the temperature of the fixture:
Current - the current temperature of the fixture inside.
Highest - the menu item shows the max. temperatures of the fixture inside since
the LiteWare HO2 has been fabricated.
High Res.
- the menu item shows the maximum temperatures of the fixture inside since
the counter was last reset. In order to reset this counter, you have to press the ENTER button,
then by means of the PREV and NEXT buttons select “Yes”and press the ENTER button again.
Measuring points: Led - temperature on the PCB with LEDs.
Board – first temperature on the PCB of the control electronic.
Board 2- second temperature on the PCB of the control electronic.
The temperatures can be displayed in either °C or °F units - see option “Temp. Uni.“ in the menu “Pers“.
Spec. F. State --- Special function stare. The menu item shows current state of switching functions on DMX channel
1.
Battery --- Battery information. Select this menu to read the battery state.
Capacity - capacity of the battery in %. Fully charged battery shows 100%.
Note: in the Full mode, the LiteWare unit can be switched off automatically when capacity has
fallen under 13%.
Voltage – voltage of the battery in V.
Current – current of the battery in mA. Symbol “–“ means discharging, “+” means charging.
Temp – temperature of the electronic controlling the battery.
Tot. Cap.
– Total capacity of the battery in Ah.
Case Ver.
– Software version of the charging case.
Sw Ver --- Software Version. Select this function to read the software version of the LiteWare unit.
6.3 Personality
Use this menu to modify the LiteWare HO2 operating behaviour.
DMX Pres --- DMX preset . Select this menu item to set a desired DMX mode. Please refer to the chapter "DMX
protocol" for detail description of each DMX mode.
Alarm Setting --- Acoustic alarm . If this alarm is on, the sensor signalizes unwanted relocation of the LiteWare
unit.
After final placing, switch the acoustic alarm on (you can also use DMX command – see DMX chart, channel
“Special function”. Do not forget to switch the sensor off prior to manipulate with the LiteWare units!
To switch the acoustic alarm on:
1. Enter the “Alarm” menu.
2. Enter the password (default password is “001”) using the PREV/NEXT buttons and confirm with the ENTER
button .