Robe Color Wash 700E AT, Руководство пользователя

Страница: 25 / 37

5
8.3 Personality
Use this menu to to modify ColorWash 700E AT operating behavior.
User mode --- ColorWash 700E AT allows you to recall up to 3 user settings.After switching the fixture on for
the first time, the User A settings is active.All changes made in “Personality” menu ,”Fixture Address” menu
and Music Trigger and Presetting Playback functions from “Stand-alone setting” menu are saved to the
User
A settings
.If you now set the
User B settings
active,from this moment these changes are saved to the
User
B settings.
After switching the fixture off and on ,the User B setting is active.In this way you may use the 3
fixture operating behaviours.
User A Settings
--- The function recall the user A settings.
User B Settings
--- The function recall the user B settings.
User C Settings --- The function recall the user C settings.
Pan Reverse --- Select this function to invert the pan movement.
Tilt Reverse --- Select this function to invert the tilt movement.
DMX Preseting --- Select this function to set desired effects assigning to the channels.Please refer to the
chapter “DMX protocol” for detail description.
Lamp Presetting --- Select this menu to change the lamp “behaviour”.
Lamp On/Power On
--- Select this function to turn the lamp on automatically after switching
the fixture on.
Lamp Off via DMX
--- Select this function to switch off the lamp via DMX.
Lamp On if DMX Present
--- This function allows you to strike the lamp automatically after
26 seconds if DMX signal is present on the data link.If the ignition is unsuccessfull (e.g.lamp
is too hot),the fixture will try to ignite the lamp after next 26 s.This process will repeat until
the lamp lights.
Lamp Off if not DMX --- This function allows you to switch Off the lamp automatically after
minutes if DMX signal is missing on the data link.
Lamp Ignition Delay --- This function allows you to set the time delay( 0-90s) before the
lamp will be ignited.This setting will not affect starting the lamp direct from the control panel
(menu “Lamp On/Off”).
Lamp Low Power Delay - This function enables set the time period after that the
lamp power will be reduced if the shutter/dimmer is closed.The delay time can be set up to
600 seconds.Default setting is10s.
Green Energy Mode
- The option "On" saves the the energy consumption of the lamp if
the light output is dimmed for long time (10 minutes and more).
Lamp Light Sensor
--- Select this function to switch the lamp light sensor on or off.The option”On” is for the
standard operation.
Important: The option”Off” is for “emergency operation” only if the lamp light sensor is defective and you will wait
for a service intervertion! If the lamp light sensor is switched off and at switching the lamp on the electronics
will still try to ignite the lamp until it shines (even when the lamp is damaged or missing), on this account some
electronics parts could be damaged!
Display Adjusting --- This function allows you to change the display settings.
Display Permanent On --- This function allows you to keep the display on or to turn off
automatically minutes after last pressing any button on the control panel.
Display Intensity --- Select this function to adjust the display intensity (1-min.,10-max.).
Display Backlight --- Select this function to adjust the display backlight (1-min.,10-max.).
Display Turned
--- Select this function to turn the display by 180°.
Blackout d.M.C.
--- Select this function to enable the blackout during the head movement correction (if the
moving head lost its right pan/tilt position for a short moment) .
Pan/Tilt Feedback
--- This function allows to return the mowing head to the required pan/tilt position after
changing the position by external force (e.g.by stroke).
Be careful, the Pan/Tilt Feedback OFF is not the standard operation and the head of the fixture can be
demaged!
Note: If the feedback was switched off ,the pan/tilt-position is changed by an external force and the feedback
is switched on again,the moving head might not to be synchronized with the DMX signal.You have to make a
reset in order to synchronize the moving head with the DMX signal.