Robe CitySource 96 WDMX, Руководство пользователя

Страница: 6 / 27

CitySource 96 (RGBW)
6
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working load limits,
installation material being used, and periodic safety inspection of all installation material and the fixture. If you lack
these qualifications, do not attempt the installation yourself, but instead use a professional structural rigger.
Improper installation can result in bodily injury or damage to property.
For overhead use, always install a safety rope that can hold at least 10 times the weight of the fixture. You must
only use safety ropes with screw-on carbines. Pull the safety-rope through the mounting bracket and over the
trussing system etc. Insert the end in the carbine and tighten the fixation screw.
Caution: Fixtures may cause severe injuries when crashing down! If you have doubts concerning the safety of a
possible installation, do not install the device.
The fixture can also stand directly on the flat surface (e.g. stage) by means of the removable stand:
3.2 Connection to the mains
Fixtures must be installed by a qualified electrician in accordance with all national
and local electrical and construction codes and regulation.
Install a suitable plug on the power cord, note that the cores in the power cord are colored according to the
following table.
Core (Eu) Core (US) Connection Plug Terminal Marking
Brown Black Live L
Light blue White Neutral N
Yellow/Green Green Earth
This device falls under class one and must be grounded!
3.3 Changing the lens array
The standard beam angle of the fixture without lens-array is 12°.
If you need a wider beam angle than 12° , you have to install the eggcrate lens module 25° or the optional
eggcrate lens modules: 45°, 45°x15° or eggcrate top hat (for placing plastic foil under it).
How to install eggcrate lens module:
1. Disconnect the fixture from the mains.
2. Place the new eggcrate lens module (2) on the front side of the fixture and screw it to the housing by
means of the four M5x14 screws (1) with washers (3).