CitySource 96 (RGBW)
19
Synchronous operation of multiple fixtures requires that they must be connected on a data link and one of them is
set as a master (“MASt“) and the rest as the slaves (“SLA“). Up to 32 fixtures can be connected in a master/slave
chain. Only one fixture can be set as the master.
Note: Disconnect the fixtures from the DMX controller before master/slave operating, otherwise data collisions can
occur and the fixtures will not work properly. See the chapters “Stand-alone operation“ and “ Master/slave
connection“.
Auto. --- Automatic playback
. This function allows you to select the program which will be played after switching
the fixture on. Selected program will be played continuously in a loop.
1.
Use the UP/DOWN buttons to find “
St.AL.
“ menu.
2.
Press the ENTER button.
3.
Use the UP/DOWN buttons to select “
Auto
“ item.
4.
Press the ENTER button.
5.
Use the UP/DOWN buttons to select desired program.
6.
Press the ENTER button to confirm the choice.
PLAY ---
Playing program
. By enter to this menu a complete overview of all programs is offered, from which the
program to be run can be selected.
1.
Use the UP/DOWN buttons to find “
St.AL.
“ menu.
2.
Press the ENTER button.
3.
Use the UP/DOWN buttons to select desired program.
4.
Press the ENTER button. The selected program runs in a loop.
Edit --- Editing a program
. The fixture offers 3 freely editable programs (EPG.1-EPG.3) each up to 68
steps. Every
program step includes a fade time-the time taken by the step´s channel status to reach the desired level and a
step time-the total time occupied by the step in the program.
E.g. If “F.tim.“=5 second and “S.tim.“=20 second, effects will go to the desired position during 5 seconds and after
that they will stay in this position for 15 seconds before going to the next prog. step
1.
1. Use the UP/DOWN buttons to find “
St.AL.
“ menu and press the ENTER button.
2.
Use the UP/DOWN buttons to select “
Edit
“ menu and press the ENTER button.
3.
Use the UP/DOWN buttons to select a program you want to edit (PrG.1-PrG.3 and press ENTER button.
4.
Use the UP/DOWN buttons to select a desired program step ("St.01" - "St.68") and press ENTER button.
5.
Use the UP/DOWN buttons to select a channel you want to edit and press the ENTER button.
List of editable items:
“P.End” -
a total number of the program steps (value 1-68). This value should be set before start
Programming (e.g. if you want to create program with 10 steps, set P.End=10).
“
rEd1”-
“
rEd2”-
a
red LEDs saturation array1/array2 (0-255)
“GrE1“-“GrE2“ - a green LEDs saturation array1/array2 (0-255)
“bLu1“-“bLu2“ -a blue LEDs saturation array1/array2 (0-255)
“Whi1“ - “Whi2“ – a white LEDs saturation array1/array2 (0-255)
“MACr“ - colour macros (0-255)
“Stro.“ - a strobe, shutter (0-255)
“dimr“ - a dimmer (0-255)
“F.dim”- a fine dimmer (0-255)
“F.tim.“ - a fade time, (0-25.5) seconds
“S.tim.“ - step time, value (0-25.5) seconds
“COPY“. – this item duplicates the current prog. step to the next prog. step. The item “P.End” is increased
automatically.
6.
Use the UP/DOWN buttons to set a DMX value of the channel and then press the ENTER button.
7.
Use the UP/DOWN buttons to select next channel and press the ENTER button.
8.
After having set all channels in the current program step, press the MODE button to go by one menu level
back and select another program step.
Содержание CitySource 96 WDMX
Страница 1: ...Version 1 6 ...
Страница 27: ...CitySource 96 RGBW 27 ...
