CityFlex 48/CityFlex 48 Wireless DMX
5
3. Installation
Warning for wireless DMX version of the CityFlex 48!
The antenna must be instaled on the fixture to keep declared IP rating of the fixture!
3.1 Rigging the fixture
The CityFlex 48 can be rigged in any orientation on a truss without altering its operation characteristics. Installation
on the truss allows the mounting adapter (1) fastened to the fixture base with four bolts M8 (2) and the Omega
holder (3) for fastening clamp.Pull through the safety rope (4) under the mounting adapter and over the trussing
system.
For overhead use, always install a safety rope (4) that can hold at least 10 times the weight of the fixture. You must
only use safety rope with screw-on carbine.
Ensure that the structure (truss) to which you are attaching
the fixture is secure
Caution:
Fixtures may cause severe injuries when crashing down! If you have doubts concerning the safety of a
possible installation, do not install the device and consult installation with an expert.
Each of the four LED modules can be adjusted to many positions by 10° steps and this way the CityFlex can create
different patterns. The pan can be adjusted in range of +/-50°.
There is a possibility to install the LED modules and the base separately on the truss. In this case, you need adapter
CF (it is not standard part of delivery, must be order extra) for rigging LED modules on the truss. The length of the
connection cables between the base and the LED modules has to be specified in order (e.g. Cable Conecting M/F
CGRBB-03, 5m (No.
1305 1864
)
.
If the LED modules and the base are installed separately on the metal structure (LED modules and the base are
galvanic interconnected), the LED modules fall under protection class I and must be grounded in accordance with
all national and local electrical and construction regulations.
Adapter CF
