CityFlex 48/CityFlex 48 Wireless DMX
17
Example 2 – Pixels are sorted in three rows
Example 3 – Four pixels are merged into “one” pixel in each row
If two or more pixels have the same pixel position (“dP.1-d.P12”) they will have the same DMX address.
Only DMX channels 1-12 are used for control this pixel configuration. If all pixels have the same pixel position, the
fixture will behave as one pixel.
F.tin.
--- Max. fade time
. Select this menu item to set a desired max. fade time (0.1-25.5 sec.). This
adjusted fade time influences fade of RGBW and dimmer during DMX operation:
If time between two receiving DMX values is > than fade time set in the item “F.tin.“, the entire adjusted fade time
will be used.
If time between two receiving DMX values is < than fade time set in the item “F.tin.“, the adjusted fade time will be
reduced to fill entire time between the two receiving DMX values.
e.g. “F.tin.“=2sec. and fixture has received Red=0 DMX, after 5 seconds will receive Red=255 DMX. It means, that
red will go to full intensity during 2 seconds.
“F.tin“.=8 sec. and fixture has received Red=0 DMX, after 5 seconds will receive Red=255 DMX. It means, that red
will go to full intensity during 5 seconds. (Max. fade time is reduced from 8 sec. to 5 sec.).
Note:
If your DMX controle sends data fast enough, set “F.tin.“=OFF.
CurV
--- Saturation curve
.
This menu item allows you to select desired running of colour saturation.
You can select 255 colour saturation runnings in all. The value .0 corresponds linear curve, the value 128
corresponds exponential curve with index 1.9 and last value 255 corresponds exponential curve with index
2.6.
