15
button on the control panel.
Display Lightness
- select this menu item to adjust the display intensity (0-100%).
Display Contrast
- select this menu item to adjust contrast of the display (0-100%).
#
RGB(W) Split
- this menu item allows you to select a way how the last pixel of the actual DMX Universe will
be split to the next DMX Universe if the actual DMX Universe does not offer enough free channels for the pixel.
(DMX Universe= set of 512 channels).
Disabled
- pixel will be moved to another DMX Universe. Some channels will stay unused.
Enabled
- pixel will use channels of actual DMX Universe and also channels of next DMX Universe.
All channels of the actual DMX Universe will be used.
#
Input Data
- this menu item allows you to select a type of input data.
RGBW
- fixture receives RGBW data
RGB
- fixture receives RGB data, white colour of connected Emineres Remote is proportionally counted.
#
DMX Hold
- if the function is on, the fixture keeps last received DMX values in case that DMX data receiving
was interrupted (e.g., disconnected DMX cable or DMX controller).
E-box mode
- this menu item allows you to select a way of Emineres Remote connection.
Standard
- Emineres Remote are switched to the internal serial connection
Pass-Thr
- Emineres Remote are switched to the internal parallel connection.
Important: Switch Off/On the E-box Remote after changing the E-box mode.
Default setting
- select this option to set fixture personalities to the default (factory) values.
5.4 Test programs
Use the menu to run a test sequence without an external controller, which will show you some possibilities of
using the E-box Remote in conjunction with LED modules.
Colors
– the item runs a colour changing of all LEDs in a loop (Standard mode has to be selected from
the menu E-box mode)
Pixels
– the item runs a pixel program in a loop (Standard mode has to be selected from the menu E-box
mode, number of pixels depends on setting in the menu DMX Preset).
5.5 Stand Alone
The fixtures on a data link are not connected to the controller but can execute pre-set program.
Important: LED modules have to be connected to the E-box Remote and the Standard mode has
to be selected
from the menu E-box mode
.
Auto Run
- This function allows you to select a program which will be played in the stand-alone mode after
switching the fixture on. Selected program will be played continuously in a loop.
Off
- the option disables Auto Run function.
Test C
- the option runs a colour changing on connected LED modules.
Test P
- the option runs a pixel program on connected LED modules.
5.6 Special settings
Wireless*
- wireless DMX information. The menu allows to read some information about wireless
DMX operation
Stat
- wireless status. Use the menu to read wireless DMX status.
Unlink
- use this item to unlink the fixture from wireless DMX.
* If wireless DMX module is installed
Software Update
- the menu item switches the E-box Remote to the update mode.
If the option Standard is selected from the menu E-box mode, the E-box Remote will be updated including
connected Eminere Remote modules.
If the option Pass-Thr is selected from the menu E-box mode, the E-box Remote will not be updated, only
connected Eminere Remote modules.
