11
Options in the control panel:
Possible numbers of connected LED modules for each E-box mode are stated in chapter 3. "Mounting".
If no DMX is received, the unit will turn on the predefined Demo mode. You can modify it by setting the unit to
a desired look via DMX and then save this via RDM by setting the "Init position LEDs" to 1:
Last Eminere on each DMX line may be terminated by setting the ‘Manufacturer PID’ ’Terminator active’ to ‘1’,
But ensure that the fixture is not already terminated with a 120 Ohm resistor as described on page 8.
