ENGLISH
17
INSTRUCTIONS AND USER MANUAL
M o d e l l s p o r t
THE FUSELAGE
01
ARF
Mill or file in the tail end of the fuselage for the
tailplane linkage ducts.
02
ARF
To do this, measure the distance of approx. 16mm
from the rear plug hole and mark the slot in advan-
ce.
03
ARF
This should extend to the lower edge of the root
formation. At the top it gets a slight rounding for
the ball head.
04
ARF
Insert the tail unit halves in between for trial fitting.
05
ARF
Drill two 10 mm holes in the rear part of the side
fuselage opening for the tail unit servos at the top
and bottom as a rod lead-through.
06
ARF
The tail unit servos are screwed into the fuselage
opening with the drive forward and are already
aligned neutrally. Mount the servo arm at a 90°
angle.
07
ARF
Make the tail linkages out of the two carbon fibre
tubes and cut them to 650mm and 690mm using
a cutting disc. Glue the threaded pieces into the
ends with 10-minute epoxy.
08
ARF
Now turn a clevis on one end and a ball head on
the other end.
