7
program 11, 2-2 = program 12, 3-3 = program
13 etc.
2.
Press
‘POWER LEVEL’
to select the
desired
power level.
3.
Enter time required using the
‘NUMERAL’
keypad.
The display will show
“STAGE 2”
4.
Press
‘START’
to save program, press
‘STOP’
to exit without saving, after saving press
‘
STOP’
to exit program function.
PROGRAMMED MENU - STAGED COOKING
Staged cooking sequences can also be saved to
the programmed menu. A staged program will
cook in 2-3 sequential time/Power stages.
1.
Press
‘PROGRAM’
2.
Enter the program number to be changed. To
select program 10-20, touch
‘NUMERAL’
pad
twice rapidly, e.g. 1-1 = program 11, 2-2 =
program 12, 3-3 = program 13 etc..
1.
Press
‘POWER LEVEL’
to select the
desired
power level.
2.
Enter time for Stage 1 using numeral keypad.
The display will show
“STAGE 2”
3.
Press
‘POWER LEVEL’
again until desired
power level for Stage 2 is displayed.
4.
Enter time for Stage 2 using
‘NUMERAL’
keypad.
5.
Repeat Step 3 and 4 if a 3
rd
Stage is required.
6.
Once Power and time settings have been
entered for required stages press
‘START’
to
save or
‘STOP’
to cancel programming.
7.
When a staged program is run the microwave
will run through each stage automatically
without user input. The display will show total
time for all stages.
CHECK PROGRAM
Time and power settings for the Programmed
menu buttons can be checked using this function.
1.
Press
‘CHECK PROGRAM’
2.
Enter the number (1-20) of the program you
want to check.
3.
Display will show the time and power settings
for each stage stored to the program entered.
4.
Press
‘STOP’
to end.
DOUBLE QUANTITY
By selecting
‘x2’
you can temporarily double the
cooking time of a previously entered program.
1.
Place the food to be cooked or heated in a
container suitable for use in a microwave then
place inside the oven and close the door.
2.
Press
‘x2’
3.
E
nter desired programmed menu number
using the
‘NUMERAL’
pad. The oven will
automatically begin the programmed cooking
sequence after a short pause.
Note: The extended cooking time cannot exceed
maximum cooking time of 60 minutes, or 20
minutes at full power.
POWER SAVE MODE
The display can be turned off when idle to save
power. To activate, press and hold
‘CHECK
PROGRAM’
for 5 seconds. When in Powersave
mode open the door or press any button to wake
the microwave. Once awake the microwave will
operate as usual. To deactivate Powersave, press
any ‘NUMERAL’ button then press and hold
‘CHECK PROGRAM’
for 5 seconds.
MUTE
Stops beep when buttons are pressed. To activate
press and hold
‘x2
’ for 5 seconds.
