6
the food needs to be turned or rearranged. When
the defrosting time ends, you will hear 3 beeps.
5.
Defrosting can be paused by pressing
‘STOP’
once or by opening the door. To resume
defrosting while paused, close the door if open
and or press
‘START
Note, Pressing
‘STOP’
again while paused or with the door open will
clear remaining program time.
QUICKSTART
1.
Place the food to be cooked or heated in a
container suitable for use in a microwave then
place inside the oven and close the door.
2.
Press
‘START’
to begin cooking with a time of
30 seconds.
3.
Pressing
‘START’
again while running will add
30 seconds to the timer. By pressing multiple
times a maximum cooking time of 5 mins can
be entered.
4.
Cooking can be paused by pressing
‘STOP’
once or by opening the door. To resume
cooking while paused, close the door if open
and or press
‘START’
Note, Pressing
‘STOP’
again while paused or with the door open will
clear remaining program time.
Note:
Quickstart always runs at 100% power
PROGRAMMED MENU
The microwave can store up to 20 Pre-
Programmed Time / Power sequences.
1.
Place the food to be cooked or heated in a
container suitable for use in a microwave then
place inside the oven and close the door.
2.
Select a pre-programmed sequence using the
‘NUMERAL’
pad to call up the desired
program. To select program 10-20, touch the
‘NUMERAL’
pad twice rapidly, e.g. 1-1 =
program 11, 2-2 = program 12, 3-3 = program
13 etc.
The oven will automatically begin the
programmed cook sequence after a short pause.
Note, if no program has been entered into a
program position
“NO DATA”
will show on the
display.
3.
Cooking can be paused by pressing
‘STOP’
once or by opening the door. To resume
cooking while paused, close the door if open
and or press
‘START’
Note, Pressing
‘STOP’
again while paused or with the door open will
clear remaining program time.
Pre-Programmed Cooking Times and Power
Level:
Note: the above programmed times and
power levels can all be changed if desired.
ENTERING A NEW PRE-PROGRAMMED
SEQUENCE
1.
Press ‘
PROGRAM’
button. The display will
read
“PROGRAM”
4.
Select a program number using the
‘NUMERAL’
pad to call up the desired
program. To select program 10-20, touch the
‘NUMERAL’
pad twice rapidly, e.g. 1-1 =
Number Cooking Time Power Level
1
0:10
100%
2
0:20
100%
3
0:30
100%
4
0:45
100%
5
1:00
100%
6
1:30
100%
7
2:00
100%
8
3:00
100%
9
4:00
100%
0
5:00
100%
