background image

 

OM2750.docx 

 

Donning Instructions 

 

It is important that your PFD is properly adjusted to fit you. An incorrect fit or improper fastening of the belt or 
attachments may impede its performance. 

The waist belt fastening system is sewn on and it utilises a quick release buckle for fastening and has an 
adjustable mechanism to fit an average person properly.  

 

Figure 7

 

 Put the Inflatable PFD on just like a jacket as depicted by Figure 7 and fasten the front buckle. Adjust the waist belt 
using the side release buckle on the belt and secure the belt’s loose end in the belt loop.  

This is a constant wear PFD and it is recommended that you are familiar with the donning instructions .It is very 
important that you wear your Inflatable PFD over a clothing. 

 

If crotch strops are attached pull these through your legs in a crossover style and attached to the buckles at the 
base of the PFD lobes. 

 

CAUTION

Do not wear your Inflatable PFDs under clothing or harnesses as the inflation could be restricted 
and affects its performance and you may also injure yourself 

 

Now that you are happy that everything is in place including familiarisation in donning, it is highly 
recommended that you practice using your inflatable PFD & test it in safe shallow water. 

 

 

 

 

 

Содержание SMA2750

















Отзывы: