Roadtrek SS-Ideal, Руководство пользователя

Страница: 56 / 72

SLIDEOUT TROUBLESHOOTING
Doc No: 21906550 Rev: 00 Copyright © Roadtrek Motorhomes Inc. 2009 I - 6
SLIDEOUT TROUBLESHOOTING:
The following is directly from the Lippert manual that comes with the mechanism:
Every coach has its own personality and what works to fix one coach may not work on another even if the
symptoms appear to be the same.
When something restricts room travel, system performances will be unpredictable. It is very important that slide
rails, rack and pinion be free of contamination and allowed to travel freely the full distance or “stroke.”
When beginning to troubleshoot the system, make sure the battery is fully charged, there are no visible signs of
external damage to the actuator, motor or rails and that the motor is wired properly and all connections are secure.
During troubleshooting, remember, by changing, altering or adjusting one thing, it may affect something else. Be
sure any changes do not create a new problem.
Additional information on the Lippert Sofa Slideout System can be had by calling 866-524-7821 and asking for
technical assistance.
The following troubleshooting chart outlines some common problems, their causes and possible corrective
actions. When reference is made to a “Power Unit,” the term includes the motor and the actuator as a complete
unit. All Power Units are shipped from the factory with a serial number and date code, which should be given to
the service technician when asking for assistance.
PROBABLE CAUSE CORRECTIVE ACTION
ROOM DOESN’T MOVE WHEN SWITCH IS PRESSED
Restriction or obstruction inside or outside of unit Check for and clear obstruction
Low battery voltage, blown fuse, defective wiring Check battery voltage and charge if needed
Find and check fuse, replace if blown
Check battery terminals and wiring
Look for loose, disconnected, or corroded connectors
POWER UNIT RUNS, ROOM DOES NOT MOVE
Motor turns; room does not move Gear key is broken or lost, replace gear
drive assembly
Broken gear on drive shaft Replace gear drive assembly
Broken gear in gearbox Replace motor/gearbox assembly
Bad motor or gearbox Replace motor/gearbox assembly
POWER UNIT RUNS, ROOM MOVES SLOWLY
Low battery, poor ground, extremely low Charge battery, check ground wire
temperature
Room in bind Adjust to proper room setting
Incorrect height adjustment Check for proper room height