Roadtrek CS Adventurous, Руководство пользователя

Страница: 49 / 136

Heating and Cooling
46
© 2015 by Roadtrek, Inc.
Alde Coolant
The Alde system uses a VW G12++ specification anti-freeze. The anti-freeze bottle is under the sink in the bathroom. To
check the level of antifreeze, remove the protective cover under the bathroom sink and visually check the level in the bottle.
If the level is low, add the specified antifreeze to the bottle. Run the system and check periodically. It may take several hours
of operation for all the air bubbles to work themselves out of the system.
The anti-freeze level should be checked before and after storage, and the system should be flushed and anti-freeze replaced
every 2 years.
Alde Frost Protection Mode
The Alde system will protect itself from freezing by dumping the water in its tank onto the ground beneath your vehicle if the
temperature approaches freezing. This protects the Alde plumbing only; you still need to winterize the remaining water
system in your Roadtrek to prevent damage to the water lines and other components. You can also drain the system
manually by turning the valve to the tripped position.
If your Alde system has dumped, you need to reset the frost control valve in the compartment under the driver's side bench
before using the water system again. Open the compartment, turn the valve 90 degrees from its tripped position pointing
toward the valve in the blue water line to a position parallel to the blue line, and press the blue button at the base of the frost
control valve on the side opposite the blue line. The Alde unit will now function normally, provided that the air temperature
around the valve is high enough.