Roadtrek CS Adventurous, Руководство пользователя

Страница: 19 / 136

Interior Living Space
16
© 2015 by Roadtrek, Inc.
To install either table, unscrew the T-nut in the lower end of the table leg as far as possible, remove the cap on the floor
socket, and put the leg into the floor socket. Rotate the leg to tighten the T-nut inside the socket to ensure it is securely
seated in the socket. If it does not tighten after a couple of turns, unscrew the T-nut in the leg, reinsert, and try again. Place
the table top on the leg and push down - it will pop into place on the small round plastic knob on the top of the table leg.
Captain's Seats
There are three adjustments on the outboard side of each front seat: the knob in front raises and lowers the front of the seat,
the lever where the back and base of the seat join raises and lowers the back of the seat, and the knob above that on the
seat back reclines the seat back. The lumbar support adjustment is on the inboard side of the seat.
Template:gallery
To swivel the front seats, locate the swivel lever positioned in the rear of the seat, and move the control sideways against its
spring to release the lock and swivel the chair.
The third seat's fore and aft adjustment is a lever extending forward at the front right corner of the seat base. Push this lever
to the left (driver's) side of vehicle, and slide the seat. The swivel lever for the rear seat is on the right (passenger) side of the
base. Push it backward to release the lock and swivel the seat.
Front seat swivel control Rear seat swivel control Rear seat fore and aft adjustment