Roadtrek CS Adventurous, Руководство пользователя

Страница: 108 / 136

HOWTO: Waste Water Dumping
105
© 2015 by Roadtrek, Inc.
• • Open the valve on the end of the sewage discharge hose.
•
• Insert the waste water discharge hose outlet into the dump station waste receptacle.
•
• There are two ways to secure the hose in the dump station waste receptacle four inch pipe. In the white box that came
with your Roadtrek there is a rubber doughnut, which goes over the discharge nozzle and can be wedged into the waste
receptacle to hold the waste water discharge hose in place. Some RV parks require you to use a doughnut. If you trust
gravity more than friction, or don't want to store the doughnut between uses, use a rock to weight the hose down. Either
way, make sure the hose doesn't get loose when you turn the pump on.
Using a rock to weight the hose down Rubber doughnut installed on nozzle
The discharge stream is forceful and will knock the hose out of the drain if you do not weight it down or secure it in
the drain with the doughnut. It is much easier and more sanitary to secure it before turning the pump on than it is to
chase it around afterwards.
• • Open the black water tank gate valve by pulling the black handle out. It will come out approximately three inches (8 cm)
and stop.
• • Press and hold the waste water pump button until the tank is empty.
The waste water discharge pump will be damaged if allowed to operate dry for any length of time. Turn off the pump
as soon as the solid stream of liquid begins to sputter, and the pump's sound changes.