Roadtrek CS Adventurous, Руководство пользователя

Страница: 103 / 136

HOWTO: Potable Water Use
100
© 2015 by Roadtrek, Inc.
The city water inlet connection is located in the front driver's side compartment, to the left of the propane tank.
Roadtrek recommends that you use a dedicated single purpose potable-water hose. These are usually white in color.
Buy a new one and use it only for filling your tanks and connecting to city water. View any hose lying around a
campground with extreme skepticism, especially it there's a wastewater dump nearby. Large RVs use hoses to flush
their wastewater system.
Access to the city water valve, side door Screws holding plastic
radiator cover on
City water valve in closed,
across-the-line position
To connect the Roadtrek's water system to an outside source:
• • Turn the water pump off.
•
• Close the city tank fill valve. To do this, bend the plastic radiator cover slightly so that the notches held by screws slip
loose. Remove the plastic cover and the city valve is inside the exposed opening on the left side of the side door step. Turn
the handle vertically to the across-the-line position (see photos above).
• • Close all interior faucets.
•
• Flush old water and any contaminants out of the water supply faucet.
•
• Connect your fresh water hose to the faucet.
•
• Attach your pressure regulator to the Roadtrek's city water connection.
•
• Attach your fresh water hose to the the pressure regulator.