Roadtrek 190 Chevrolet, Руководство пользователя

Страница: 23 / 93

3. Ensure that you achieve privacy by extending all privacy doors and closing the gallery curtain.
4. Release the Velcro retention straps and move the hand held shower from its storage position on
the shelf to its shower position shown in Picture B-P25:
Picture B-P25:
Hand held shower head in its shower position.
5. Draw the shower curtain until you are completely surrounded.
6. Using the Velcro connectors, secure the edges of the curtain together allowing the shower hose to
hang within the shower area to retain any dripping water inside the curtains.
7. When adjusting the water temperature, be sure to allow enough time for the temperature adjusted
water to exit the shower head before making further adjustments.
8. To conserve water , discontinue the water flow at the shower head between wetting and
rinsing .
To put away the stand-up shower:
1. Rinse and dry the shower curtain thoroughly (this function is most easily performed before leaving
the shower area after use).
2. Allow the curtain to air dry completely (this function can be expedited using the power roof vent).
3. Follow the above instructions for stand-up shower set up in reverse order.
4. Replace drain plug in floor when finished .
To prevent grey water tank contents from spilling onto the floor while driving, keep the drain plug
secured at all times.
DAILY LIVING
Page B.11
Printed in Canada
Copyright     Hanmar Motor Corporation 2001
Doc No: FMSA0002 Rev: 01