KIT# 3128-3
04/15/14
KS
All illustrations and specifications contained herein are based on the latest information available at the time of publication approval.
ROADMASTER, INC. reserves the right to make changes at any time without notice in material, specification and models or to discontinue models.
Fig.S
Fig.T
14. Attach the side braces to the frame rails — Starting with the driver side, thread one of the supplied ½" x 1¼" bolts and
lock washers through the pre-drilled hole in the side brace, and through the existing hole in the frame rail (Fig.S). Next,
position the 1½" x 3" nutted backing plate over the bolt (Fig.S). Thread the bolt onto the backing plate. Finger-tighten only
at this time.
For the passenger side, thread a ½" x 1¼" bolt and lock washer onto the 1½" x 3" backing plate, and position it over
and into the pre-existing hole in the frame rail (Fig.T). The hole on this side brace is threaded. Use a ratchet or a ratchet-
ing wrench to thread the bolt onto the brace (Fig.U).
Fig.U
Fig.W
15. Level the bracket (Fig.V). Then, tighten the driver side brace bolt (Fig.V) to the torque specifications at the bottom of
these instructions.
16. Once the passenger side bolt has been threaded onto the side brace, use an air ratchet to tighten the bolt (Fig.W) to
the torque specifications at the bottom of these instructions.
17. Tighten all bolts to the torque specifications at the bottom of these instructions.
18. Attach the upper braces to the main brace — Slide both the driver side and the passenger side upper braces between
the hood latch support and the frame horn (Fig.X).
19. Once they are in position, secure
both of the upper braces to the main
brace with two 7/16" x 1¼" bolts,
flat washers, lock washers and nuts
(Fig.Y).
20. Trim the water bottle bracket
on the bumper core, using the black
mark in Figure Z as a reference.
Fig.X
Fig.Y
Fig.V
Fig.Z
2. Thread
the bolt.
1. Position the
nutted backing
plate.
BASEPLATE KIT
INSTALLATION INSTRUCTIONS
ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 360-896-0407 fax 360-735-9300 www.roadmasterinc.com
