KIT# 3128-3
04/15/14
KS
All illustrations and specifications contained herein are based on the latest information available at the time of publication approval.
ROADMASTER, INC. reserves the right to make changes at any time without notice in material, specification and models or to discontinue models.
Fig.J
8. Remove two plastic fasteners, on each side (Fig.J), attaching the air deflectors to the bumper core, so that the air
deflectors can be pulled to one side (Fig.K).
9. Remove the bumper core — First, remove one 10mm bolt on the water bottle support bracket, on the passenger side
(Fig.L). Next, remove the four 13mm head nuts on each side which connect the bumper core to the frame horns (Fig.M).
Remove the bumper core (Fig.N).
Fig.K
Fig.L
Fig.M
Fig.N
10. On the driver side, remove one 10mm bolt to remove the horn (Fig.O).
Fig.O
Fig.P
11. On the passenger side, use a file or a die-grinder to remove a metal tab on the subframe (Fig.P).
12. Fit the two lower braces to the subframe — Slide the braces between the frame and the subframe, and bolt each one
in place with one of the supplied ½" x 4" bolts and ½" lock washers through the existing holes in the subframe (Fig.Q).
Finger-tighten only at this time.
13. Attach the main brace — The brace fits between the radiator and the frame rail on the passenger side, and to the out-
side of the frame rail on the driver side. Bolt the main brace to the lower braces with two ½" x 1¼" bolts, lock washers and
nuts on each side (Fig.R).
Fig.Q
Fig.R
BASEPLATE KIT
INSTALLATION INSTRUCTIONS
ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 360-896-0407 fax 360-735-9300 www.roadmasterinc.com
