KIT# 3128-3
04/15/14
KS
2. Then, remove three plastic fasteners along the edge of each fender well (Fig.D).
3. Remove 18 plastic fasteners attaching the center splash shield to the fascia, fender liners and the subframe (Fig.E).
Then, remove the center splash shield (Fig.F).
4. Remove one plastic fastener (on each side) holding the fender liner to the
frame rail (Fig.G).
5. On each side, remove two 10mm nuts and one 10mm bolt holding the
fascia to the fender (Fig.H).
6. Also on each side, disconnect the plug for the side marker light, as well as
the plug for the fog light and the turn signal light (Fig.I).
7. Pull down and forward on each side to remove the fascia.
Fig.A
T
his is one of our MX series brackets, which allows the visible
front portion of the brackets to be easily removed from the
front of the vehicle (Fig.A and Fig.B). The bracket consists of a
main receiver brace, two lower braces, two upper braces, two remov-
able front braces and a hardware pack.
Before starting the installation, lay out the kit components in
order, as they will be used. This will give you a visual idea of how the
components work, and will also confirm that everything is present
and accounted for.
1.
Important:
please use all supplied bolts and parts and read
all instructions carefully before beginning this installation. The
majority of questions you may have can be answered within the
text, and proper installation will ensure safe and secure travel.
Now, begin the installation. Start by removing 10 plastic fasteners
across the top of the grill and the fascia (Fig.C).
Fig.B
Fig.C
Fig.D
Fig.E
Fig.F
Fig.G
Fig.H
Fig.I
BASEPLATE KIT
INSTALLATION INSTRUCTIONS
ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 360-896-0407 fax 360-735-9300 www.roadmasterinc.com
