RMF Systems CMS 2, Руководство пользователя

Страница: 33 / 84

32
As a policy of continual improvement, RMF reserves the right to alter the specification without prior notice.
201.028 REV 1 Date of Issue: 18 June 2018
Figure 6.17
Figure 6.18
The first time that this is done, the correct communications port (COM port) on the computer has to be selected,
as detailed below.
− The program scans the computer for available ports, and puts them in a list to choose from - this list is in the
box above the Connect button. Press the arrow on the right hand side of this box and choose the connection on
your computer.
− All working communication ports of the computer are available for selection. Select the one used to connect the
CMS, and then press OK. If you are unsure which port is correct, the device name should be next to the COM port
number. When communication has been established successfully, the remote control dialogue will appear. After a
successful connection, the COM port will be remembered for next time and will appear preselected in the
dialogue. If no COM ports appear, please refer to the fault finding section the manual (7.2).
6.3.2 PC Software Operation
The Remote Control dialogue allows an operator to manually control the CMS from a laptop, using the RMF-View
software. It can also be used to download test results that have accumulated during autonomous (disconnected)
operation.