RME Audio Babyface Pro Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 94

background image

94

User's Guide Babyface Pro

© RME

38. Declaration of Conformity

CE

This device has been tested and found to comply with the limits of the European Council Direc-
tive on the approximation of the laws of the member states relating to electromagnetic compati-
bility according to RL2004/108/EG, and European Low Voltage Directive RL2006/95/EG.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV technician for help.

RoHS

This product has been soldered lead-free and fulfils the requirements of the RoHS directive.

Note on Disposal

According to the guide line RL2002/96/EG (WEEE – Directive on Waste
Electrical and Electronic Equipment), valid for all european countries,
this product has to be recycled at the end of its lifetime.

In case a disposal of electronic waste is not possible, the recycling can
also be done by Audio AG.

For this the device has to be sent

free to the door

to:

Audio

AG

Am Pfanderling 60

D-85778

Haimhausen

Germany

Shipments not prepaid will be rejected and returned on the original sender's costs.

«
...
92
93
94

Содержание Babyface Pro































































































Отзывы:

Нет отзывов

Похожие инструкции для Babyface Pro

Бренд: Banner Страницы: 2

Бренд: Campbell Страницы: 70

Бренд: Yuasa Страницы: 35

Бренд: 3M Страницы: 10

Бренд: Datalogic Страницы: 248

Line FP7000 Housing

Бренд: Fantasea Страницы: 5

Бренд: Fantasea Страницы: 5

Бренд: Fancom Страницы: 49

Бренд: FANATEC Страницы: 2

Бренд: Federal Signal Corporation Страницы: 8

Бренд: Federal Signal Corporation Страницы: 8

Бренд: Lastolite Страницы: 3

Бренд: TAUBENREUTHER Страницы: 11

Бренд: Yakima Страницы: 15

Бренд: Yoshimura Страницы: 7

Home Power Hockey Table

Бренд: Great American Recreation Страницы: 10

Бренд: Bercomac Страницы: 20

Бренд: FORM FIT Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды