RME Audio Babyface Pro, Руководство пользователя

Страница: 46 / 94

46 User's Guide Babyface Pro © RME
Loopback.
Sends the output data to the driver as record data. The corresponding submix can
be recorded then. This channel’s hardware input sends its data only to TotalMix, no longer to
the recording software.
Another difference to the input and playback channels is the
Cue
button instead of Solo. A click
on Cue sends the respective Hardware Output’s audio to the
Main
Out, or any of the Phones
outputs (option
Assign / Cue to
in the Control Room section). With this any hardware output can
be controlled and listened to through the monitoring output very conveniently.
A click on EQ opens the
Equalizer
panel. It is available in all input and output channels, and
affects all routings of the respective channel (pre fader). The panel includes a low cut and a 3-
band parametric equalizer which can be activated separately.
EQ.
Activated by the EQ button.
Type.
Band 1 and 3 can operate in peak (bell) or shelf
(shelving) mode. The middle band is fixed to peak mode.
Gain.
All three bands can change their amplitude
(amplification) b20 dB to -20 dB.
Freq.
The center frequency of the filter is adjustable
between 20 Hz and 20 kHz. While in peak mode the center
frequency is adjusted, in shelf mode the cut-off point (-3
dB) will be changed.
Q.
The Quality factor of the filter is adjustable from 0.7
(wide) to 5.0 (narrow).
Lo Cut.
Activated by the button Lo Cut. The slope of the
high-pass filter is adjustable between 6, 12, 18 and 24 dB
per octave. The cut-off point (-3 dB) is adjustable between
20 Hz and 500 Hz.
The frequency graphics give a precise overview of the filter results. Overlapping filters influence
each other. This can be used to achieve more than 20 dB amplitude, or to generate difficult
frequency response optimizations.
Note: TotalMix has an internal headroom of 24 dB. Extreme boosts with overlapping filters can
therefore cause an internal overload. In any case such an overload is displayed by the Over
LED of the channel’s level meter.