Hard Reset
• When resetting remove the pluggable contact terminal blocks.
• On the underside of the device next to the power terminals and system alarm contact you will see an opening
labeled reset.
•
Warning
: This next step will clear all current configurations and restart the device.
• Insert a non-conductive object into the reset hole and depress the button for 5 seconds.
• The device will then restart to indicate it has gone through the factory default reset process.
!
Reset Button on Bottom
Software Factory Reset
• Login to the web browser and view the reset page.
• On the bottom right of the reset page you will see, in smaller font, a
Set to default
option
(highlighted in the screen image on the next page). Click on the link.
•
Warning
: This next step will clear all current configurations and restart the device.
• On the next screen you will need to click the
Restore
button.
!
Restart the Device Screen
RESET
PWR2
PWR1
COM
NO
ALARM
NC
Device Configuration
35