manualshive.com logo in svg

RKI Instruments GX-2003, Руководство оператора, Страница: 123 / 153

Поделиться
Скачать
RKI Instruments GX-2003 Скачать руководство пользователя страница 123

 

Viewing, Printing, Exporting, and Deleting Data • 29

The lower left frame contains three selection boxes for 
organizing data. If none of the boxes are selected, then the data 
is organized as shown in Figure 18. The data may be organized 
by one or more of the following parameters: serial number, 
station ID, or user ID. Click the selection box or boxes in the 
lower left frame to organize the data as desired.

NOTE: In the examples that follow, the data will be shown 

organized by serial number. If you do not select any of 
the organization boxes or select the Station ID or User 
ID boxes instead of or in addition to the Serial No. box, 
your Data window will look slightly different.

The upper right frame shows the contents of a data folder that is 
selected in the Data frame. The lower right frame shows the 
summary information for a data file that is selected in the upper 
right frame.

The View Data control button is located at the bottom of the 
lower right frame. The View Data button becomes active when a 
data file is selected in the upper right frame. Clicking the View 
Data button opens the data file and displays the data. 

Calibration History

Instrument calibration history is available in two separate 
locations in the program. The information regarding the most 
recent successful calibration for each channel of an instrument 
along with whether or not an instrument is due for calibration 
can be accessed using the Last Calibration button on the right 
side of the program window. See “Last Calibration Button” on 
page 17 for a complete description of the information that can be 
accessed by the Last Calibration button.

All downloaded calibration information for all downloaded 
instruments is available in the Calibration History folders in the 
Data window. This information is saved in a Calibration History 
folder that is located in an untitled folder for each instrument. 
The calibration history files are differentiated by instrument. The 
calibration information available here is more comprehensive 
than that in the Last Calibration window. The calibration 
information for all calibrations downloaded, whether successful 
or not, is saved instead of just the most recent successful 

Содержание GX-2003


























































































































































Отзывы:

Нет отзывов