AirLink 6940XP Operator’s Manual
Installation
•
20
5. Use the handles to gently push the internal system into the mounting posts.
6. Verify that the O-ring on the enclosure lid is undamaged and correctly seated in place.
7. Affix the enclosure lid back onto the device, rotating the lid until it is tightly screwed into
place.
8. The unit will start in OFF mode. Press
ADD
to initiate the 1-minute startup.
Closing the Enclosure
1. Place the internal system back into the enclosure, matching each mounting post to its
corresponding eyelet anchored within the base of the enclosure.
2. Using the front panel handles, gently push to seat the internal system into the mounting posts.
3. Verify that the sealing ring, seated at the threaded opening of the device enclosure, is correctly
in place.
4. Place the enclosure lid back onto the device, and rotate it until the lid is tightly screwed into
place.
WARNING: When securing the lid onto the device, tighten the enclosure lid by hand ONLY.
Overtightening of the lid by use of hand-tools could result in damage to the O-
ring, potentially compromising the moisture seal, resulting in an unsafe
environment.
