RJS inspector 5000 Скачать руководство пользователя страница 127 | Manualshive

Страница: 127 / 129

RJS inspector 5000 Скачать руководство пользователя страница 127

Operator

’s Guide

Appendix M

003-4500

RJS, Minneapolis, MN

121

Substitution Error

This error can be seen in a mis-encodation, mis-read
or human operator error where characters that were
to be entered were substituted with erroneous
information.

Substrate

The material (paper, plastic, metal, etc.) upon which a
bar code symbol is

“printed” or reproduced.

Symbol

See Bar code symbol.

Symbol Contrast (SC)

This parameter grade can be

“A,” “B,” “C,” “D” or “F.”

Symbol contrast is the difference in reflectance values
of the

“lightest” space (including the

quiet zone) and

the

“darkest” bar of the symbol. The greater the

difference, the higher the grade.

SC = Rmax - Rmin

Symbol Grade

The simple average of all the overall profile grades
using the standard weighing

4.0 = A

3.0 = B

2.0 = C

1.0 = D

0.0 = F

The symbol grade may be stated as a decimal or
converted to a letter grade. A measuring aperture
number and nominal wavelength are also specified.

Symbology

A set of rules for encoding information in a bar code
symbol.

«
...
125
126
127
128
129
»

Содержание inspector 5000


































































































































Отзывы:

Нет отзывов