RJS inspector 5000 Скачать руководство пользователя страница 106

Страница: 106 / 129

Appendix J

Operator

’s Guide

RJS, Minneapolis, MN

003-4500

100

Traditional Analysis (Bar width deviations chart)

“R” letters represent “range”

of bar widths in the code.

“A” represents the average of all character bar width

deviations.

The closer the

“A” is to the center of the display, the

better.

The following shows the percentage of the scanning
tolerance used at each position on the display:

+
8



Negative numbers to the left indicate bars that are

narrower



Positive numbers to the right indicate bars that are wider

The closer the

“A” is to the edge, the more likely the

Reject.
A symbol is

“Acceptable” until any calculated bar width

deviation exceeds 100% of the tolerance for the
symbology decoded; for example:

Bar Width - Acceptable

-100% Tol. +100%
------RRARR+++++

Bar Width - Warning

-100% Tol. +100%
--------++RRRARR

Bar Width - Rejected

-100% Tol. +100%
--------+++++++R

“A” is out of

tolerance and off the screen.

Содержание inspector 5000


































































































































Результаты поиска

Содержание inspector 5000

Отзывы:

RJS inspector 5000, Руководство оператора, Страница: 106 / 129

Результаты поиска

Содержание inspector 5000

Отзывы: