RJS inspector 5000 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 129

RJS inspector 5000 Скачать руководство пользователя страница 10

Inspector 5000

™ Auto Optic

Operator

’s Guide

RJS, Minneapolis, MN

003-4500

4

2.0 Warranty

2.1 General Warranty

Warranty information: +1 (763) 746-8034

RJS warrants your Inspector 5000 to be free from defects
in material and workmanship for a period of 1 year from
the date of shipment from RJS

’ factory location.

The liability of RJS under this warranty is limited to
repairing or replacing the defective part and/or unit. RJS
may optionally choose to issue credit for any unit returned
during the warranty period.

You must promptly notify RJS of any defect in order to
receive the full protection of this warranty.

2.2 Warranty Limitations
The warranty set forth above is exclusive and no other
warranty, whether written or oral is expressed or implied.
RJS specifically disclaims the implied warranties of
merchantability and fitness for a particular purpose.

Some states or provinces do not allow limitation on how
long an implied warranty lasts, so the above limitation or
exclusion may not apply to you. However, any implied
warranty of merchantability or fitness is limited to the one
year duration of this written warranty.

RJS shall in no event be liable for any indirect, incidental,
or consequential damages, including but not limited to
damages which may arise from loss of anticipated
profits or production delivery delays, spoilage of material,
increased costs of operation of business or otherwise.

2.3 Service during the Warranty Period
If your Inspector 5000 should fail during the warranty
period, contact RJS or its authorized representative

«
...
8
9
10
11
12
...
»

Содержание inspector 5000


































































































































Отзывы:

Нет отзывов