RJM Mastermind GT/10, Руководство пользователя, Страница: 51 / 73

43
Setup Mode Reference
Setup mode allows you to configure all aspects of the Mastermind GT, from the MIDI messages it sends to the way
information is displayed on the screens.
To enter setup mode, press and hold the two soft buttons located under the main display. After about 2 seconds, the
display will change, indicating you’re in setup mode.
In Setup Mode, the footswitch buttons switch from their normal functions to become a menu for selecting setup
options. The soft buttons under the main screen change function from screen to screen. The bottom row of the main
display has small labels over each soft button to indicate the function of each button.
The button immediately to the right of the main display is always labeled
Done (or Cancel when selecting a value from
a list). This button will exit the current setup menu level and move up to the previous menu. Pressing Done in the top
level setup menu will return you to the normal operational mode.
Each setup menu may have more available options than can be displayed on the Mastermind GT’s displays. If this is the
case, the
Next Page button will be lit. Pressing this button cycles through all of the available options, one page at a
time.
You can exit Setup Mode at any time by holding the left soft button and pressing the right soft button. This brings you
directly to the normal operational mode of the Mastermind GT.
Button Selection
In certain menus, you will be asked to select a button. If this is the case, the footswitch buttons will show their normal
functions except that they will flash to indicate that you’re in setup mode. You can select any button on the currently
visible page simply by pressing it. To switch to a different button page, press the left soft button (labeled
Next Page ).
Current Pg
1
Set List
All Songs
Setup Mode
Select an option
Done
Done
Next
Page
Edit
Devices
Edit
Buttons
Edit
Presets
MIDI
Settings
System
Functions
Display
Settings