RJM Mastermind GT/10 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 73

RJM Mastermind GT/10 Скачать руководство пользователя страница 49

41

Connecting to a Computer

In addition to the USB flash drive support, the Mastermind GT’s

USB B

port allows you to connect your controller to a

PC or Mac with a USB port. The Mastermind GT is a class-compliant USB MIDI device, which means it doesn’t need
additional driver software. The Mastermind GT will appear as another MIDI device in your system, and will work with
any MIDI-enabled programs you’re using.

To get the Mastermind GT to send commands over the USB port, use the Edit Devices menu to set the

MIDI Port

parameter to “USB”. Any messages that are sent to that device will be sent over the USB port instead of the standard
MIDI ports. Since you’re communicating with a computer instead of an effect processor, you will most likely want to
create a Generic MIDI device and set it’s MIDI port parameter to “USB”. That will allow you to send commands to a
computer without affecting the settings you have for your other MIDI devices.

The Mastermind GT has been tested successfully on PC systems running Windows 7 and Windows 8. Windows XP
systems are not supported. Mac OS 10.7 through 10.9 systems are also known to be compatible with the Mastermind
GT. Older Mac OS versions will likely work, but are not tested at this time.

Mastermind GT Editor

The Mastermind GT Editor software is available for free on our website. This software makes it even easier to edit your
GT’s parameters and back up settings to your computer. Settings can be transferred from the GT to the computer and
vice versa using a USB flash drive or a direct USB connection from GT to computer.

«
...
47
48
49
50
51
...
»

Содержание Mastermind GT/10










































































Отзывы:

Нет отзывов