9
Remote control guide
9
Presets
FLAT (6)
Press this button to return the bed to a flat position.
ZERO GRAVITY (7)
Press this button to activate the zero gravity position. This preset position elevates the legs slightly higher than the
chest, in effect, allowing the blood to flow back to the heart to help reduce stress and fatigue.
TV (INCLINE) (8)
Press this button to activate the incline position. This preset raises the head section to an ideal position for watching TV,
reading, or laptop use.
LOUNGE (LEISURE) (9)
Press this button to adjust the bed into a chaise lounge position to help remove stress and tension from your lower back.
Safety lock (5)
Press and hold for 3 seconds to lock the controls on the remote so that no adjustments can be made. Press again and
hold for 3 seconds to unlock.
Memory preset buttons (10)
You can store new head and foot positions by customizing the preset buttons: M1, M2, and M3. These can be
reprogrammed with your desired positions at any time.
Move the head and/or foot sections to your desired position.
Press and hold one of the preset buttons until you hear a beep. The new bed position is now stored in your selected
preset button.
You can choose to save over this setting by repeating the steps above with a new position.
1
2
Massage options
TIMER (13)
When the massage is on, use this button to set a time. Press this button once for a 10 minute massage, twice for a 20
minute massage, and 3 times for a 30 minute massage. Pressing the button a fourth time will cancel the timer.
STOP (14)
Press this button to disable any active massage.
WAVE MODE (15)
Wave mode massage changes the pattern of the massage from a constant vibration to a patterned, wave vibration.
Head or foot massage (11 & 12)
Press the + or - on the "H" button to operate the upper (+) or lower (-) head massage.
Press the + or - on the "F" button to operate the upper (+) or lower (-) foot massage.
