(Fig 2)
Attaching the guide bar lower section
Insert the guide bar lower section (6) to motor housing (7) and fix it by two
supplied screws M4X20
Attaching the carrying handle
Connect guide bar lower section (6) and carrying handle (5) by inserting both
side the supplied bolts (12) and swing nut (13).
Attaching Upper guide bar
Slide the cable relief (3) onto the upper guide bar.
Connect guide bar by inserting both side the supplied bolts (12) and swing nut
(13).
Attaching safety switch
Insert the safety switch (1) to guide bar up section (4) and fix it by two supplied
screws ST4x20
Using supplied two cable clips (11) to hold cable.
OPERATION