Riverstone Networks RS 8000/8600 Switch Router Getting Started Guide 4-1
4 INITIAL CONFIGURATION
This chapter provides the following information on powering up the RS 8000/8600 and performing basic setup
procedures. Basic setup includes:
•
Powering on the RS 8000/8600 and booting the software
•
Starting the Command Line Interface (CLI)
•
Activating and saving configuration changes
•
Assigning passwords
•
Using the CLI to add an IP interface, subnet mask, and default gateway
•
Setting up SNMP
•
Assigning a DNS server(s) to the RS
•
Configuring the SYSLOG server and server message levels
•
Managing redundant Control Modules
4.1
POWERING ON THE RS 8000/8600
To power on the RS 8000/8600, perform the following steps:
1.
Make sure all exposed line card slots and power supply bays are free of foreign objects such as
tools and are covered with blanks.
2.
Check the power supplies to make sure they are attached to your power source.
3.
Make sure that the RS’s DB-9 console port is connected to an active terminal or a PC running
terminal emulation software.
4.
Turn the switch on each power supply to the ON position.
If this is the first time you have powered on the RS, it will automatically boot using the software image on
the PC flash card. While the software is booting, the amber Offline LED on the Control Module is lit. When
the software finishes booting, the Offline LED goes dark and the green Online LED lights up, indicating that
the Rapid Operating System (ROS) software is online.
As the software boots, the management terminal or PC attached to the Control Module’s DB-9 DCE port
displays messages related to the phases of the boot sequence.
Here is a partial example:
Boot Software Version 2.0.1.1, Built Jan 25 2001 20:55:16
Processor: R7000 rev 2.1 [0x2721], 280 MHz, (bus: 93 MHz), 256 MB DRAM
I-Cache 16 KB, linesize 32. D-Cache 16 KB, linesize 32.
Содержание RS 8000
