Riverdi STM32 Evaluation Board User Manual Rev. 1.4
© 2021 Riverdi
Page 9 of
16
www.riverdi.com
Hello World
After connecting to Eval Board, to generate its first text message (e. g. 'Hello World'), we are going to
use the EVE Screen Editor’s built
-in drag & drop editor.
(The drag operation is shown in green, the generated coprocessor commands are shown in the yellow
box and the button to send the data to the EVE display is seen inside the red box.)
What you see now is the preview of what will be drawn on the physical screen in a moment. Note that
in the lower part of the window the coprocessor tab shows which EVE pre-processor commands were
generated and will be sent to the EVE display shortly after.
To send the commands also drawn in the preview pan to the physical display, press the button labeled
“
Upload RAM_G and RAM_DL
”.
