Riverdi STM32 Evaluation Board User Manual Rev. 1.4
© 2021 Riverdi
Page 10 of
16
www.riverdi.com
Using the SPI on the STM32
Prerequisites
•
Riverdi STM32 Evaluation Board
•
EVE enabled display
•
RiBUS flexible flat cable (FFC)
•
Your favorite tool to flash the onboard STM32 (assuming that you use STM32CubeProgrammer
together with an STLink v2 compatible ISP Programmer)
Installation
Use the provided source code or the pre-compiled binary file.
Configuration
In order to connect the STM32 to the EVE display, the configuration jumpers need to be placed between
P9 and P8. Check the jumper and the USB cable position (in ‘STM32 USB’ socket) in the picture below.
