Riverdi STM32 Evaluation Board User Manual Rev. 1.4
© 2021 Riverdi
Page 5 of
16
www.riverdi.com
Introduction
Riverdi STM32 Evaluation Board
is a tool designed to help get you started on working with Riverdi
products. It not only supports EVE modules but also RGB displays (in combination with touch panels)
by Riverdi.
You have two primary options to drive external displays:
1.
Jumper between P7 & P8: FTDI serial/SPI bridge connected to RiBUS SPI:
Use the FT232 serial to SPI bridge by connecting a micro USB cable to the connector labeled
“Direct USB” and using the
EVE Screen Editor
to quickly generate graphical user interfaces with
minimum effort .
2.
Jumper between P9 & P8: STM32 connected to RiBUS SPI:
Use the onboard STM32F4 to develop and test firmware for driving a connected display or
display controller, like the FT80x, FT81x and BT81x series.
Board functionality test
There are firmware examples with which you can test your Riverdi STM32 Evaluation Board. You can
also use those as a starting point for your own firmware development.
