Riverdi STM32 Evaluation Board User Manual Rev. 1.4
© 2021 Riverdi
Page 6 of
16
www.riverdi.com
Interfacing with EVE Displays
Using the FTDI SPI Bridge & EVE Screen Editor
Prerequisites:
•
Riverdi STM32 Evaluation Board
•
EVE-enabled display
•
RiBUS flexible flat cable (FFC)
EVE Screen Editor Installation
Download and install the EVE screen Editor from the FTDI homepage:
https://www.ftdichip.com/Support/Utilities.htm#EVEScreenEditor
Setup & Configuration
To connect the FTDI SPI bridge to the EVE display, the configuration jumpers need to be placed
between P7 and P8, as in the picture below.
Set the backlight jumper (placed over the backlight power configuration pins) to 5V BL on P4 (also
refer to the picture below). Please see description on how to connect power for backlight in section
“
Hardware features
”
, subsection
“
Backlight power supply
”.
