RIUKOE ML-BSW280, Руководство пользователя

Страница: 20 / 33

20
operation:
Enter the page of DMX address, as shown in Figure 5, click the blank area in
right side of display will pop-up diglog as in Fig. 4, modify value, then click
‘ENTER’ to confirm and save DMX address code.
Figure 5 page of DMX Address
2. Set Light work mode
Enter the page of ‘WORK MOD’ as shown in Figure 6 and modify setting. Can
set light work mode, control lamp and DMX channel mode..
Light includes 3 work mode: DMX MODE, AUTO RUN and SOUND MODE,
Parameter definition as following:
⚫
DMX Mode
：
Under this mode, the light receive data from the DMX
controller and move.
⚫
AUTO RUN
：
Under this mode, light will run with inside code(data), ignore
data from DMX controller.
⚫
SOUND Ctrl
：
Under this mode, light ignore data from DMX controller.,
When there is a strong sound in stage, the light will run a scene, otherwise
it will keep the last scene.
⚫
M/S Choose
：
’M/S Choose’ is available when light just in ‘AUTO RUN’ or
‘SOUND Ctrl’ mode. If this item is set as ‘OFF’, the light don’t send data to
other light via DMX Cable. When ‘ON’, the data will send to other slave
light immediately.
⚫
Lamp control
：
Turn on lamp when this item is set ‘ON’, otherwise, turn off
lamp. The gap between operation is limited to 30 second.