RIUKOE ML-BSW280, Руководство пользователя

Страница: 5 / 33

5

During the initial operation of this fixture, a light smoke or smell may emit
from the interior of the fixture. This is a normal process and is caused by
excess paint in the interior of the casing burning off from the heat
associated with the lamp and will decrease gradually over time.

This fixture is a professional lighting effect designed for INDOOR / DRY
LOCATIONS ONLY on stage, in nightclubs, theatres, etc.

Please make sure there are NO FLAMMABLE MATERIALS close to the
fixture while operating, to prevent any fire hazard.

The fixture must be installed in a location with adequate ventilation, at
least 1.5 feet (.5m) from adjacent surfaces. Be sure no air ventilation slots
are blocked.

DO NOT attempt installation and/or operation without knowledge how to
do so.

DO NOT permit operation by persons who are not qualified to operate this
type of fixture. Most damages are the result of operations by
nonprofessionals. Consistent operational breaks may ensure the fixture
will function properly for many years to come.

DO NOT shake fixture, avoid brute force when installing and/or operating
fixture.

Always install the fixture with an appropriate safety cable. When installing
the fixture in a suspended environment, always use mounting hardware
that is no less than M10 x 25 mm, also be sure the hardware is insert in
the pre-arranged screw holes in the bracket of the fixture.

Use the original packaging and materials to transport the fixture in for
service.

DO NOT TOUCH the housing bare-hand during its operation. Turn OFF
the power and allow approximately 15 minutes for the fixture to cool down
before replacing or serving.