RIUKOE ML-BSW280, Руководство пользователя

Страница: 7 / 33

7
The equipment must be fixed by professionals. And it must be fixed at a place
where is out of the touch of people
.
Clamp mounting
The moving head provides a unique mounting bracket assembly that integrates
the bottom of the base, the included ‘
Omega Bracket
’ and the
Safety Cable
rigging point in one unit (see the illustration below).When mounting this fixture
to truss be sure to sere to secure an appropriately rated clamp to the included
Omega Bracket using a M10 screw fitted through the center hole of the
‘omega bracket’. As an added safety measure be sure to attached at least one
properly rated
Safety Cable to the fixture using one of the safety cable rigging
point integrated in the base assembly.
DMX-512 control connection:
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the
other side to the male 3-pin XLR input of the moving head. You can chain multiple Moving
head together through serial linking. The cable needed should be two core, screened cable
with XLR input and output connectors. Please refer to the diagram below.