Page 4
www.kpa-solutions.com
English
7 CONNECTIONS
All connections have to be made or changed only if the amplifier is switched off!
7.1 Inputs
Connect the output of the KPA to one of the jacks to the Camplifiers INPUT sockets.
The input signal should have line level.
Information on installing speaker cables
Input cables should be short and direct, since high frequencies will mostly be absorbed if the ca-
bles are unnecessarily long. Besides that a longer cable may lead to humming and noise trouble.
If long cable runs are unavoidable, you should use balanced cables.
Occupation jack plug:
Unbalanced use of
Tip =
hot (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
1/4" jack plugs
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at a stereo plug.
