Page
www.kpa-solutions.com
English
6. Installation / Assembly
Preface :
The CAMPLIFIER 360 is designed to operate as an add on module inside the Kemper Profiling
Amplifier.
Any operation outside of the Kemper Profiling Amplifier can cause damage to equipment and cause
mortal electrical shock.
Should you experience any difficulties when installing the CAMPLIFIER 360 into the Kemper Profil-
ing Amplifier , please contact our technical support at :
Tilman Ritter
RITTER Amplification
Veteranenstrasse 3
039 Dresden
Tel. : 035 60 5 982
Please do
NEVER
connect the power cord to the CAMPLIFIER 360 when the unit has not been as-
sembled into the Kemper Profiling Amplifier correctly!
6.1 Preparation prior Installation
Check the upper chamber at the back side of the Kemper Profiling Amplifier (KPA) for objects such
as cables, paper, guitar picks, guitar strings etcetera. Remove all objects from this chamber!
