Rittal 7999.009, Руководство по эксплуатации

Страница: 5 / 40

Rittal Micro Data Center Level E 5
2 Safety instructions
EN
2 Safety instructions
The Micro Data Center Level E produced by Rittal
GmbH & Co. KG is developed and produced with due
regard to all safety precautions. Nevertheless, the unit
still causes a number of unavoidable dangers and risks.
The safety instructions provide you with an overview of
these dangers and the necessary safety precautions.
In the interests of your safety and the safety of others,
please read these safety instructions carefully before as-
sembly and commissioning of the Micro Data Center
Level E.
Follow the user information found in these instructions
and on the unit carefully.
2.1 Safety notes for personnel protection
Danger! Electric shock!
Work performed unprofessionally on the
electrical equipment of the Micro Data
Center can cause serious injuries and
death.
Work on the electrical equipment of the
Micro Data Center may be performed
only by an electrician or by trained per-
sonnel guided and supervised by an
electrician. All work must be performed
in accordance with electrical engineer-
ing regulations.
The mains connection data cited on the
rating plate must be adhered to.
Prior to performing any maintenance
work, the Micro Data Center must be
disconnected from the mains power.
Danger! Electric shock!
Contact to live parts can cause severe
injuries or death.
Ensure that the customer-supplied po-
tential equalisation has been performed
professionally and connected with the
central earthing point in the Micro Data
Center.
Also ensure the reliable protective earth-
ing of all built-in components.
Ensure the adequately dimensioned cur-
rent carrying capacity of the potential
equalisation.
The customer must earth the built-in
components.
Explosion hazard
If UPSs with integrated or separate bat-
tery packs are installed in the Micro Data
Center, this can lead to an explosion.
UPSs with integrated batteries or sepa-
rate battery packs may be installed in
the Micro Data Center only with ade-
quate ventilation in accordance with
EN 50272-2.
Danger of collapse
The failure of the building structure can
cause severe injuries and death.
Prior to the assembly of the Micro Data
Center, check the requirements placed
on the building statics.
The Micro Data Center may be posi-
tioned only where the building structure
is dimensioned adequately.
Danger of becoming trapped
Injuries can occur when the safety doors
are opened or closed.
Ensure that you do not reach between
the door and frame while opening and
closing the doors. Maintain an adequate
safety clearance.
Blocked escape routes
In case of an emergency, blocked es-
cape routes can lead to injuries or death.
Ensure for the choice of the Micro Data
Center installation location that ade-
quately-wide escape routes are present.
Do not place any objects in the area of
the Micro Data Center's safety doors.
Confinement of persons
The confinement of persons in the not-
fully equipped Micro Data Center can
lead to injuries.
Before closing the not-fully equipped
Micro Data Center, ensure that no per-
sons are still present in the Micro Data
Center.