Rittal 7999.009, Руководство по эксплуатации

Страница: 16 / 40

6 Installation and commissioning
EN
16 Rittal Micro Data Center Level E
6 Installation and commissioning Components of the Micro Data Center
Note:
The Micro Data Center may be installed and
commissioned only by trained specialists
certified by Rittal GmbH & Co. KG.
Note:
The installation and commissioning of the Mi-
cro Data Center is described in a separate in-
stallation user's guide.
Caution:
482.6 mm (19") adjustment
There is danger caused by falling devices. No
devices may be installed on the internal
mounting rails when they are adjusted. The
failure to adhere to this rule can lead to se-
vere injuries and/or damage to devices.
Note:
The Rittal Micro Data Center is designed only
for use with officially approved units.
The safety of the configuration must be
checked for the installation of units without
official approval. The installation of the units
must conform with the associated provisions
for the installation of electrical units and data-
processing units.
The installation may be performed only by
trained specialists with the appropriate ap-
proval.
Prior to equipping the Micro Data Center, you
should specify the placement of all compo-
nents.
The factors of the associated components,
such as weight, accessibility as well as the
requirements placed on the power supply,
temperature and air circulation, affect the or-
der and the location where you place compo-
nents in the rack.
Always place the heaviest components at the
bottom of the Micro Data Center. At least two
persons are required for the assembly and
disassembly of assemblies or components
that weigh more than 22.5 kg. A correct fas-
tening and the safe positioning of all compo-
nents and rack assemblies must always be
assured.