Ritmo ELEKTRA LIGHT, Справочник по эксплуатации и техническому обслуживанию

Страница: 35 / 58

35
EN
Language setting
Type code 1100 (using the B
pushbuttons).
The last language chosen is
displayed.
Use the
B pushbuttons to change
the language, then press OK to
confirm.
Reset welding reports
Type code 2110 to reset the
welding reports.
Press
OK to confirm.
Software Upgrade
You can upgrade the software of
the
Elektra machine by
connecting the serial/USB
adapter cable to a USB flash
drive
(with the upgraded
software).
Procedure:
Download the upgrade to a USB
flash drive, then connect it to the
machine (the machine must be
turned off). Press
STOP and keep
it pressed until you turn on the
machine.
Wait until the beeping ends. The
main menu with the new version
will then be displayed.
MENU 6/8 (OPERATOR)
Give an ID to the welding
operator and link it to the
weldings.
Use +/- buttons to select the
characters or numbers of the
operator ID. Use STOP / OK
buttons to move back and
forward among the 8 available
characters. Once the cursor is
positioned in the last character,
use OK button to store the ID.
V1xx 09:40 16/03/10
OK!
ITALIANA
1100
OPERATOR