ritm Voyager 2N, Руководство по эксплуатации

Страница: 57 / 173

www.ritm.ru 57 of 173
Operating Manual. Voyager 2N
Voltage sensor
When this sensors is on and the voltage drops below the discharge
threshold (below the set “blue” threshold), an alarm is activated, a distress
event is generated and stored in the history, and a respective message is
submitted to the server.
Charging of the tracker battery begins 10 minutes after the “Engine on”
threshold has been exceeded (above the set “red” threshold).
To determine the on-board voltage level, you need to connect the
tracker power supply to the vehicle on-board mains. A green line on the
chart will show the measured voltage level.
To determine the voltage level when the engine is running, you will
need to turn on the engine and, while it remains idle, turn on all possible
energy consumers, i.e., low and high beams, fog lamps, mirror and rear
window heaters, seat heater, and ACU. The on-board voltage threshold at
the running engine should be set between the value at the running engine
and maximum number of consumers and the voltage measured with the
engine off. We recommend the measurement of voltage values before
configuring operating thresholds to be done for at least 1–2 minutes.
For determining the vehicle battery discharge, we recommend setting
the threshold below the normal voltage at engine off to be 1–2 V.
To change voltage thresholds, drag and drop an arrow with the desired
voltage to the right of the chart. For precise adjustment of voltage
thresholds, please use keyboard keys “ ↑ ” and “ ↓ ”. A dashed line on the chart
allows visual comparison of the chosen voltage value with the measured
on-board mains voltage level (Fig. 16).
i
Please note, that on-board voltage levels are individual for each
vehicle.