ritm Voyager 2N, Руководство по эксплуатации

Страница: 120 / 173

www.ritm.ru 120 of 173
Operating Manual. Voyager 2N
Passenger traffic sensors MATRIX IRMA
Overview
The tracker allows to connect up to 8 IRMA MATRIX traffic sensors. The
tracker is equipped with 3 discrete inputs to control connected sensors (1
of 4 discrete tracker inputs is used for connection of an alarm button). If
individual control of more than 3 traffic sensors is needed use “Input
Extender (V-EB)” manufactured by the “Ritm” company. Connection
diagram see in the “Connection of IRMA MATRIX traffic sensors” section.
Operation concept
The common concept of operation with traffic sensors is the following:
1. The sensors are connected to the tracker according to
the connection diagram contained in the “Connection
of IRMA MATRIX traffic sensors” section.
2. Vehicle units allowing to control opening/closing doors
during stops (for example vehicle door limit switches)
are connected to the tracker discrete inputs.
3. Upon opening doors the tracker receives the appropriate signal
from the door limit switches and transmits it to the connected
sensors. The sensors start to calculate passengers. After
closing doors the sensors are deactivated till the nest stop.
Configuration
To operate with traffic sensors configure the following settings:
1. Configure tracker inputs which should be used for connection
to limit switches of vehicle doors: set " Discrete" type for
desired inputs in the "Input terminals" section. In addition
configure the triggering signal (positive or negative) in the
"Input terminals" section, “ Input signal polarity” option).
2. To transmit data into the GEO.RITM software activate
transmission of data on states of required discrete
inputs in the section "History Structure".