5
Configuration Mode
Red + Green
Always on
Device ready to be connected to PC
Red
Blinks 5 times
Getting ready for configuration reset
Red
On
Configuration reset to factory settings
Red
Blinks faster than once
per second
Device not added to radio system
Red
Blinks 5 times after 3 s Faulty device
8.
Device: Getting Ready for Operation and Adding to Radio System
8.1.
Place a device on a fixed surface of a door or window opening at least 1 m from
the receiving radio channel device. Install the mating piece to the window frame
or door.
Do not place the device in the vicinity of EMI sources, large
metal objects and structures, power cable runs!
8.2.
Open the enclosure.
8.3.
Install a battery and close the cover.
8.4.
After closing the device cover or installing the battery, the device switches to
battery test mode, signaled by the red indicator turning on for 2 seconds. If the
battery had not been in use for a long time, it depassivates. The red indicator
lights up in series of flashes illustrated in the figure below up until the moment
the battery goes into the normal operating mode. If a battery remains in this
mode for longer than 15 minutes, it is recommended to replace it.
t
Red
2 s
1 s
4 s
1 s
1 s
After testing a battery (the battery now operates at its normal voltage), the red
indicator will light up for 4 seconds, and then the green indicator lights up for 1
second.
If the depassivation has not been performed, the red indicator lights up for 2
seconds, after which the green indicator lights up for 1 second.
